The common gate valve used in the market has long been leaking or rusting. The factory introduced the elastic seat gate valve produced by European high-tech rubber and valve manufacturing technology to overcome the defects of poor seal, elastic fatigue, rubber aging and rust. The elastic valve seal gate valve is produced by the elastic valve.

The compensation effect of micro elastic deformation can achieve good sealing effect. The valve has the advantages of light opening valve, reliable sealing, good elastic memory and long service life. It can be widely used in water, sewage, construction, petroleum, chemical, food, medicine, light textile, electric power, ship, metallurgy, energy system and other fluid pipelines as regulation and interception devices.

Characteristic:

Light weight:

The body is made of high-grade ductile iron, and its weight is reduced by about 20%-30% compared to the traditional gate valve. It is easy to install and maintain.

Flat bottom seat

The traditional gate valves are often washed by water.

Such as stones, wood blocks, cement, iron filings, sundries, etc.

In the groove of the valve bottom, it is easy to cause no tight switch and water leakage. The bottom of the elastic seat seal valve is designed with the same flat bottom as the water pipe. It is not easy to cause the deposition of sundries, so that the fluid is unblocked.

Valve whole package:

The valves are made of high quality rubber for overall and outsourced rubber. The first class European rubber vulcanization technology makes the vulcanized valves accurate and accurate, and the rubber and nodular cast iron valves are firmly connected, not easy to fall off and have good resilient memory.

Precision casting body:

The valve body is made by precision casting and precise geometric dimensions, so that the valve body can be sealed without any finishing process.

Embedded copper nut:

The copper nut and the elastic valve are embedded in the joint, so that the two parts are tightly jointed into one body, and no vibration or loosening or damage can occur due to water flow.

Corrosion resistance:

The body is made of powdered epoxy resin, which prevents corrosion and rust of the valve body and can be used in the sewage system.

Not easily broken:

In the past, traditional cast iron gate valves often cause breakage due to foreign objects hitting, colliding or heavy pressing. Since the body is replaced with ductile iron, this situation has been greatly reduced.

Three "0" ring seal ring:

Because the valve body adopts three "0" ring seal ring seal design, it can reduce the friction resistance of the switch, greatly reduce the leakage phenomenon and can replace the sealing ring without water stop construction.

Help students drink:

Because of the non-toxic epoxy resin coating inside the valve body, the inner and outer surfaces of the valve are completely covered with rubber without rust water or corrosion, which can be used for drinking.